CONTACT USAll Products
Triangle Coatings
New Products
News & Events
Quality, Value, & Service

No documents found.

Triangle Coatings
Triangle Coatings
Home > Industrial Paint > All Products

All Industrial Products

Industrial Products6 Series – Goldstone™
A high IR reflectance microwave antenna enamel, this coating was specially formulated for the NASA Deep Space Instrumentation Facilities to protect microwave antennas from heat accumulation. This product can also be used to protect large dish telescopes and radio receivers. 

Please Call for Availability

Industrial Products7 Series – Goldstone™  *NEW!*
A high IR reflectance antenna enamel, this new & improved water based formula protects microwave antennas, large dish telescopes, and radio receivers from infrared radiation and heat accumulation. This ultra low VOC coating also allows electromagnetic waves to pass, ensuring accurate data collection.

7 Series Data Sheet

Industrial Products10 Series – AquaGuard™  
Waterborne Silicone Alkyd. The 10 Series is a water reducible gloss silicone alkyd enamel designed primarily for the maintenance of industrial iron and steel structures in VOC regulated areas. It has exceptional gloss retention and an established record of 10+ year durability in fully exposed marine environments.

10 Series Data Sheet

Industrial Products16 Series – TriAqua™ 
TriAqua is a VOC compliant*, single component, water reducible, alkyd finishing enamel. Designed for direct, two coat application to hand cleaned iron or steel, TriAqua produces a near automotive gloss, a fast dry, and the best early water resistance of any latex or alkyd. With superior adhesion and durability, TriAqua provides good gloss retention and long lasting metal protection.

16 Series Data Sheet

Industrial Products16G798 – TriAqua™ SuperChrome  
TriAqua™ SuperChrome is a high gloss water reducible enamel.  The 16 Series is a single component, water reducible, air-dry finishing enamel with a low VOC content. It is designed for one coat spray application directly onto hand-cleaned iron and steel.

16G798 Series Data Sheet

Waterborne Primers & Enamels20 Series – TriBake™ W
Water Based, VOC Compliant*, High Performance, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface. Very good corrosion resistance when applied to correctly prepared surfaces. High solid content provides high square foot coverage. Water clean-up.

20 Series Data Sheet

Waterborne Primers & Enamels21 Series – TriBake™ S
VOC Compliant*, High Performance, Solvent Based, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface. Very good corrosion resistance when applied to correctly prepared surfaces. High solid content provides high square foot coverage.

21 Series Data Sheet

Waterborne Primers & Enamels30 Series – TriKote™ W
Water Based, VOC Compliant*, Fast Dry, Economical Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer. Water clean-up.

30 Series Data Sheet

Waterborne Primers & Enamels31 Series – TriKote™ S
VOC Compliant*, Fast Dry, Economical, Solvent Based Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer.

31 Series Data Sheet

Industrial Products33 Series – TriGuard™ 
This high gloss, silicone alkyd enamel provides the best gloss retention and durability possible in a single component formula. TriGuard provides excellent protection against moisture and excellent resistance to elevated temperatures up to 350°F. Fast drying, TriGuard cures to an exceptionally hard, uniform finish that rivals factory baked systems for appearance and performance.

33 Series Data Sheet

Industrial Products33G798 – TriGuard™ SuperChrome
TriGuard is a premium, silicone alkyd enamel with aluminum pigmentation, to provide excellent gloss retention, durability, and protection against moisture. This product provides an exceptionally hard, uniform finish that rivals factory baked systems for appearance and performance.

33G798 Series Data Sheet

Industrial Products35 Series – Bakote™ Industrial & Marine Enamel
A general purpose, high solids, oil modified maintenance enamel, Bakote provides excellent corrosion protection and is easy to apply.

35 Series Data Sheet


Industrial Products35G798 – Bakote
SuperChrome
An industrial and marine enamel, the 35 Series is a traditional general purpose, high solids, long and medium oil alkyd enamel for industrial and marine maintenance. Bakote SuperChrome has a high gloss, is relatively flexible, and provides excellent corrosion protection.

35G798 Series Data Sheet

Waterborne Primers & Enamels37 Series – PermaKote™ S
VOC Compliant*, Fast Dry, Acrylic Alkyd Topcoat. Can be applied direct to correctly prepared surfaces. Very good gloss and color retention. Good abrasion resistance and film hardness. Can be catalyzed to provide near urethane performance. High solid content provides high square foot coverage.

37 Series Data Sheet

Industrial Products37G798 – PermaKote SuperChrome
A fast drying product finishing enamel, the 37 Series is a single component, solvent based, alkyd topcoat with a high solids content, providing superior gloss, depth, and clarity.


37G798 Series Data Sheet

Epoxy Primers & Enamels41 Series – Tripoxy™ 
Tripoxy is a 2-part, high solids, high gloss epoxy enamel. This coating cures to an extremely dense and hard finish, without being brittle. Impermeable and insensitive to water, Tripoxy is suitable for submersion service. With excellent adhesion, this coating provides excellent resistance to common solvents, alkalis, and splash and spills from most acids.

41 Series Data Sheet

Epoxy Primers & Enamels43 Series – Tripoxy™ HB   
This high solids surface tolerant epoxy mastic provides excellent chemical and water resistance. Intended for application to hand cleaned iron and steel, Tripoxy HB is recommended for submersion in fresh, salt, and waste water, when applied over blasted clean metal.

43 Series Data Sheet

Epoxy Primers & Enamels44 Series – Epoxy Acrylic DTM™  *NEW!*
This two-component water-based epoxy acrylic primer and finish is designed for direct-to-metal applications over properly prepared surfaces. It dries to a tough, durable finish and exhibits excellent performance, high build, and rust-inhibitive properties. This coating is used to protect exterior and interior structural ferrous and nonferrous steel, institutional walls, and industrial machinery. When used in conjunction with high build zinc rich primers, it is suitable for moderate duty marine applications. When used as one part of a three-coat system, 44 Series is also suitable for bridge coating applications.

44 Series Data Sheet

Industrial Products50 Series – TriAqua™ W *NEW & IMPROVED FORMULA!*
This water based, VOC compliant*, fast dry, acrylic alkyd topcoat can be applied direct to correctly prepared surfaces. With very good gloss and color retention, TriAqua provides good abrasion resistance, film hardness, and water clean-up.

50 Series Data Sheet

Industrial Products249 Series – Trilon™ S *NEW!*
VOC Compliant*, Fast Dry, Extreme Performance, Exterior Grade Urethane Topcoat. Trilon can be applied direct to correctly prepared surfaces. Featuring outstanding long-term gloss and color retention, Trilon also has high chemical, abrasion, impact resistance and high film hardness.


249 Series Data Sheet

Waterborne Primers & Enamels250 Series – Trilon™ W
Water Based, VOC Compliant*, Extreme Performance, Exterior Grade Urethane Topcoat. Can be applied direct to correctly prepared surfaces. Outstanding long-term gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Water clean-up.

250 Series Data Sheet

Industrial Products283P Series – Aquapoxy™ Primer – DISCONTINUED
This product has been discontinued and replaced by our 966P Series TriBond™ W. Please see 966P Series - TriBond™ W for more information.



966P Series Data Sheet

Industrial Products283PAJ60 – Aquapoxy™ Primer, Light Green
Aquapoxy Primer™ is a high performance primer for fiberglass, aluminum and nonferrous metals where conventional primers may cause adhesion failures. This primer is a water reducible, VOC compliant*, polyamide epoxy. Available in light green.


283PAJ60 Data Sheet

Industrial Products317 Series – DrumKote™ 
DrumKote is a waterborne, VOC Compliant*, steel drum finish that provides a durable, solvent resistant flexible film with a glossy finish when properly cured. Designed for coating steel drums, DuraKote delivers long lasting durability in a one coat application.

317 Series Data Sheet

Industrial Products360G900 Series – Trilon™ Clear - DISCONTINUED
This product has been discontinued and replaced by our new 249 Series Trilon™ S. Please see 249 Series - Trilon™ S for more information.


249 Series Data Sheet

Industrial Products361 Series – Trilon™ - DISCONTINUED
This product has been discontinued and replaced by our new 249 Series Trilon™ S. Please see 249 Series - Trilon™ S for more information.


249 Series Data Sheet

Industrial Products500 Series – TriThane™ Acrylic Urethane - DISCONTINUED
This product has been discontinued and replaced by our new 249 Series Trilon™ S. Please see 249 Series - Trilon™ S for more information.


249 Series Data Sheet

Industrial Products500HR6 – Goldstone™ Polyurethane
Goldstone™ is a specially formulated coating designed to have high infrared radiation reflectance. Formulated for the NASA Deep Space Instrumentation Facilities to protect microwave antennas from heat accumulation, this enamel is also used to protect large dish telescopes and radio antennas.

500HR6 Series Data Sheet

Industrial ProductsLP249 Series – Liquid Porcelain™ Acrylic Urethane Finishing Enamel *NEW & IMPROVED FORMULA!*
Triangle Industrial’s Liquid Porcelain product family has proven itself time after time as a unique and invaluable tool for tub and tile re-finishers for over 35 years. With a new and improved formula, Liquid Porcelain has improved performance and lower VOC. This porcelain–like glaze was formulated specifically by Triangle Industrial for the tub and tile industry and can be used on bathtubs made of fiberglass, porcelain or steel, sinks, Formica, faux marble or ceramic tile countertops in the kitchen or bath, as well as shower stalls made of fiberglass or ceramic tile.

LP249 Data Sheet

Industrial Products902P Series – TriPrime™       
Triangle Industrial’s TriPrime is a high performance “work horse” primer with a high solid content. The 902P Series is solvent reducible, corrosion inhibitive and fast drying for iron and steel.

902P Series Data Sheet

Industrial Products903P Series – Bakote™ Primer 
Bakote Primer is a single component, solvent reducible, corrosion inhibitive maintenance primer for industrial iron and steel. It has a high solid content and is a surface tolerant, all-purpose primer designed for simple field application to hand cleaned metal.

903P Series Data Sheet

Industrial Products920Z Series – KoldGalv™ 
The 920Z Series is an epoxy ester primer for iron, steel, and galvanized metal. With a high zinc dust content, KoldGalv™ provides rich galvanizing repair.


920Z Series Data Sheet

Industrial Products941P Series – Tripoxy™ Primer  
Tripoxy Primer is a 2-part, polyamide cure epoxy primer for iron and steel. This primer features corrosion inhibition and prevention with excellent hardness, durability, and adhesion. Tripoxy Primer provides a smooth, orange peel free finish.

941P Series Data Sheet

Industrial Products941FAM35 – Liquid Porcelain™ Epoxy Primer
Triangle Industrial’s premier high solids epoxy primer, 941FAM35 is formulated to fill rough surfaces while promoting great surface adhesion – perfect for even the toughest tub refinishing job.

941FAM35 Data Sheet

Industrial Products943P309 – Tripoxy™ HB Primer
This two-component formula is an excellent surface tolerant, high build epoxy primer designed for ferrous and nonferrous metals where conventional primers may cause adhesion failures. Exhibiting good flow and leveling characteristics, this primer provides an extremely high performance coating system when used in conjunction with a two-part urethane topcoat.

943P309 Data Sheet

Industrial Products945P Series – AquaTech™ Primer
This waterborne epoxy ester primer is a single component, water reducible, corrosion inhibitive primer. Formulated for shop application to steel, galvanized steel, and aluminum parts, AquaTech Primer provides excellent protection from elements, and good impact and abrasion resistance.

945P Series Data Sheet

Waterborne Primers & Enamels954P Series – ShopCoat™ S
VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and waterbased alkyd topcoats.

 

954P Series Data Sheet

Waterborne Primers & Enamels955P Series – TriPrime™ S
VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.



955P Series Data Sheet

Waterborne Primers & Enamels956P Series – TriBond™ S
VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated for extreme corrosion protection. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats.

956P Series Data Sheet

Waterborne Primers & Enamels964P Series – ShopCoat™ W
Water Based, VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and water based alkyd topcoats.

964P Series Data Sheet

 

Waterborne Primers & Enamels965P Series – TriPrime™ W
Water Based, VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.


965P Series Data Sheet

Waterborne Primers & Enamels966P Series – TriBond™ W
Water Based, VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated to provide a quick recoat time to meet high speed production needs. TriBond W bonds extremely well to properly prepared iron phosphate and blasted surfaces to provide durable protection against corrosion and water. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats.

966P Series Data Sheet

Industrial Products980P Series – AK8™ Rust Converting Latex Primer
AK8 is a unique, 2-step electrochemical process that converts rust into a black coating to further be primed with a rust preventive primer or topcoated. By converting rust, this corrosion control coating prevents rust from returning where old rust had formed.

980P Series Data Sheet

Industrial Products983P946 – Liquid Porcelain™ Tri-Bond Adhesion Promoter
Triangle Industrial’s Tri-Bond is the latest generation in chemical bonding technology! An integral part of the Liquid Porcelain system Tri-Bond is easily applied and fast drying. Our trademark hot-pink color lets you see immediately that you have full and even coverage and we guarantee our brand will not bleed thru, ruining your work like some of the other inferior products out there. Wipe on to even the slickest porcelain, fiberglass, steel, ceramic or masonry surface for dramatically improved surface adhesion. 

983P946 Data Sheet

Industrial Products11 Series – Resin Blend Paint Additive
Paint colorant for tinting and adding corrosion resistance properties to specialty water based industrial coatings. Available resin blends include AE110 Gray Resin Blend (RAL 7031), AE115 Blue Resin Blend (RAL 5015), AE131 Blue Resin Blend (RAL 5010), and AE140 Jet Black Resin Blend. May be packaged in five gallon pails or fifty-five gallon drums. This product can be custom formulated to meet customers specific color requirement.

Please Call for Availability

Industrial ProductsAM356 – Fastech ShopCoat™
Fastech ShopCoat primer is a spray only, fast dry – solvent reducible alkyd shop primer. This fast recoat primer is designed for simple OEM application to contaminate free iron and steel surfaces.

AM356 Series Data Sheet

Industrial ProductsAT60 – Liquid Porcelain™ Urethane Thinner
Triangle Industrial’s AT60 is a water and alcohol-free thinner specifically designed for optimum thinning, flow and dry time of our Liquid Porcelain refinishing system.

AT60 Data Sheet

Industrial ProductsAX01 – Liquid Porcelain™ Nitro-Speed Cure Accelerator
Triangle Industrial’s AX01is a powerful accelerator used to decrease the curing time of Liquid Porcelain refinishing system.

AX01 Data Sheet

Industrial ProductsAX03 – Liquid Porcelain™ Anti-Slip Additive
Triangle Industrial’s AX03 is a high-quality anti-slip additive for the Liquid Porcelain refinishing system. It contains not only one but two sizes of polypropylene beads uniquely designed to create an enhanced slip-resistant surface.

AX03 Data Sheet

Industrial ProductsAX04 – Liquid Porcelain™ Bubble Gum Scent Additive
Triangle Industrial’s AX04 is a high-performing additive for the Liquid Porcelain refinishing system that masks even the strongest solvent odors inherent in any tub refinishing system with a pleasant smell, making  it easier to work with and definitely  more pleasing to any customer.

AX04 Data Sheet

Industrial ProductsCAL24 – CalTrans Specification Red Oxide Latex Primer
This high performance, low VOC*, water reducible latex primer was formulated for iron, steel, and galvanized metal. CAL24 provides excellent adhesion and corrosion resistance on properly prepared surfaces where a waterbased topcoat is to be applied. Intended for field application, CAL24 can also be used as a shop or maintenance primer.

CAL24 Series Data Sheet

 

*Check your local air quality control regulations for VOC compliance.

 

Triangle Coatings
Triangle Coatings
Triangle Coatings
Triangle Coatings
Triangle Coatings
Triangle Coatings
Triangle Coatings
Triangle Coatings
Triangle Coatings
SITEMAP
> Web Powered by, C3i3 Interactive <