Low VOC White Mountain™ Products
W9-03K – AquaGlaze System™ *NEW!*
White Mountain AquaGlaze System is a two step, high performance coating system developed to provide exceptional protection and intense enhancement of concrete and masonary surfaces. The revolutionary undercoat AquaGlaze brings out detailed patterns and enhances the colors in stone and masonry. AquaGlaze provides the same superior deep penetration and enhancement as Wet Look, in an environmentally friendly, extremely low VOC, water based formula. OverGlaze is a low VOC, water based topcoat that dries to a tough, durable finish for repelling water and stains. This system exhibits excellent adhesion and provides an extremely hard, glossy finish for interior and exterior applications.
W1-07 – AquaGlaze™ – *NEW!*
White Mountain AquaGlaze™ was developed as an extremely high performance, universal sealer formulated from cutting edge technology. This revolutionary sealer exhibits excellent adhesion and provides a durable, glossy finish on interior and exterior applications. AquaGlaze™ enhances the colors in stone and masonry and brings out detailed grain patterns in hardwood surfaces. Ideal for protecting both natural and manufactured substrates, this sealer offers the same superior deep penetration, protection, and enhancement of Wet Look OX in an environmentally friendly, extremely low VOC, water based formula.
W1-04 – Invisoseal™
White Mountain Invisoseal™ is a penetrating water sealer that provides up to 10 years of invisible protection for stone, concrete and masonry surfaces. Invisoseal utilizes micro-emulsion technology to deeply penetrate porous surfaces, retaining the natural color and finish of stone, unglazed tile, or decorative concrete. Specifically developed to repel water, dirt, mildew and algae stains, this non-gloss sealer also works as an effective grout release. Invisoseal is perfect for vertical applications, providing superior protection while retaining the natural beauty of the chosen substrate.
W1-06 – Ultrapel™
White Mountain Ultrapel™ is an invisible, stain-blocking sealer that locks out oil, grease and other organic stains from concrete, masonry and tile. Designed for use in dining, food service areas and parking facilities, Ultrapel makes no appreciable change in the appearance of most surfaces. Effective on interlocking concrete and clay pavers, colored and stamped concrete, flagstone and other porous surfaces, Ultrapel can even repel stains such as engine oil, by causing the oil to bead-up and stay above the surface until washed away. If left unprotected, oil and other dark liquids can soak in, permanently staining a paver or porous surface. Protect the appearance of your floor easily with Ultrapel.
W1-03 – Wet Look SC™ – Low VOC Formula
White Mountain Wet Look SC – Low VOC meets the strict guidelines set by the South Coast Air Quality Management District for acceptable product VOC levels. With a VOC (Volatile Organic Compound) content of 48 grams per liter, it far exceeds the base limits set by SCAQMD 1113. Wet Look SC – Low VOC performs as well as our original Wet Look OX formula, adding a high-gloss finish and enhancing the natural colors of the surface to which it is applied.
W1-01 – Crystal Seal™
White Mountain Crystal Seal™ is a stain resistant sealer for stone, concrete, pavers and unglazed tile. Current advancements in water based acrylic micro-emulsion coatings technology have allowed us to develop the ultimate, long-lasting sealer. It protects against water damage, spalling caused by freeze/thaw conditions, stains from oil or grease, and discoloration from dirt. One coat produces a satin finish while additional coats produce added gloss, color enhancement and protection.
W1-17G – TigerTung™ Wet Look Lacquer
White Mountain TigerTung™ Wet Look Lacquer creates a deep penetrating clear barrier coating. It protects and beautifies surfaces by bringing out the rich colors of clay pavers, colored, stamped or embossed concrete, and enhances the natural beauty of exposed aggregate, natural stone and slate while providing a slip resistant surface. TigerTung’s ultraviolet resistant, salt resistant acrylic base resin is formulated from the latest developments in masonry coating chemistry, combining cutting edge and innovative ingredients to create the ultimate in deep penetration, beauty and protection with slip resistance for all concrete, unglazed tile, paver and masonry surfaces. TigerTung seals the applied surface making it stain resistant to oils, food and leaf tannin while providing protection against pool salt/chlorine water. In addition, TigerTung is ideal as a joint stabilizer for interlocking pavers.
W1-12 – Water Based Wet Look Sealer™ – DISCONTINUED
This product has been discontinued. Please refer to our Water Based Sealers for water based concrete sealing options.
W1-09 – Seal Lock™
White Mountain Seal-Lock™ is an interlocking paver sealer and joint sand stabilizer providing superior protection against stains and exceptional water resistance, while retarding the adhesion of molds and mildew. Its properties seal the space between the pavers and reduce weed growth. One coat produces a satin finish while additional coats produce added gloss, color enhancement and protection. Seal Lock transforms sand into a hard, grout like surface.