Low VOC Products

Industrial Products

50 Series – TriAqua™

This water based, VOC compliant*, fast dry, acrylic alkyd topcoat can be applied direct to correctly prepared surfaces. With very good gloss and color retention, TriAqua provides good abrasion resistance, film hardness, and water clean-up.

250 Series – Trilon™ W

Water Based, VOC Compliant*, Extreme Performance, Exterior Grade Urethane Topcoat. Can be applied direct to correctly prepared surfaces. Outstanding long-term gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Water clean-up.

White Mountain Products for Concrete, Masonry Stone

W1-02SC – Wet Look Lacquer – Low VOC Formula

White Mountain Wet Look Lacquer – Low VOC meets the strict guidelines set by the South Coast Air Quality Management District for acceptable product VOC levels. With a VOC (Volatile Organic Compound) content of 48 grams per liter, it far exceeds the base limits set by SCAQMD 1113. Wet Look Lacquer – Low VOC performs as well as our original Wet Look Lacquer formula, adding a high-gloss finish and enhancing the natural colors of the surface to which it is applied.

W1-04 – Invisoseal™

White Mountain Invisoseal™ is a penetrating water sealer that provides up to 10 years of invisible protection for stone, concrete and masonry surfaces. Invisoseal utilizes micro-emulsion technology to deeply penetrate porous surfaces, retaining the natural color and finish of stone, unglazed tile, or decorative concrete. Specifically developed to repel water, dirt, mildew and algae stains, this non-gloss sealer also works as an effective grout release. Invisoseal is perfect for vertical applications, providing superior protection while retaining the natural beauty of the chosen substrate.

W1-06 – Ultrapel™

White Mountain Ultrapel™ is an invisible, stain-blocking sealer that locks out oil, grease and other organic stains from concrete, masonry and tile. Designed for use in dining, food service areas and parking facilities, Ultrapel makes no appreciable change in the appearance of most surfaces. Effective on interlocking concrete and clay pavers, colored and stamped concrete, flagstone and other porous surfaces, Ultrapel can even repel stains such as engine oil, by causing the oil to bead-up and stay above the surface until washed away. If left unprotected, oil and other dark liquids can soak in, permanently staining a paver or porous surface. Protect the appearance of your floor easily with Ultrapel.

W1-01 – Crystal Seal™

White Mountain Crystal Seal™ is a stain resistant sealer for stone, concrete, pavers and unglazed tile. Current advancements in water based acrylic micro-emulsion coatings technology have allowed us to develop the ultimate, long-lasting sealer. It protects against water damage, spalling caused by freeze/thaw conditions, stains from oil or grease, and discoloration from dirt. One coat produces a satin finish while additional coats produce added gloss, color enhancement and protection.

W1-17G – TigerTung™ Wet Look Lacquer

White Mountain TigerTung™ Wet Look Lacquer creates a deep penetrating clear barrier coating. It protects and beautifies surfaces by bringing out the rich colors of clay pavers, colored, stamped or embossed concrete, and enhances the natural beauty of exposed aggregate, natural stone and slate while providing a slip resistant surface. TigerTung’s ultraviolet resistant, salt resistant acrylic base resin is formulated from the latest developments in masonry coating chemistry, combining cutting edge and innovative ingredients to create the ultimate in deep penetration, beauty and protection with slip resistance for all concrete, unglazed tile, paver and masonry surfaces. TigerTung seals the applied surface making it stain resistant to oils, food and leaf tannin while providing protection against pool salt/chlorine water. In addition, TigerTung is ideal as a joint stabilizer for interlocking pavers.

W1-12 – Water Based Wet Look Sealer™ – DISCONTINUED

This product has been discontinued. Please refer to our Water Based Sealers for water based concrete sealing options.

W1-09 – Seal Lock™

White Mountain Seal-Lock™ is an interlocking paver sealer and joint sand stabilizer providing superior protection against stains and exceptional water resistance, while retarding the adhesion of molds and mildew. Its properties seal the space between the pavers and reduce weed growth. One coat produces a satin finish while additional coats produce added gloss, color enhancement and protection. Seal Lock transforms sand into a hard, grout like surface.