Alkyd Primers & Enamels

Alkyd Primers

902P Series – TriPrime™

Triangle Industrial’s TriPrime is a high performance “work horse” primer with a high solid content. The 902P Series is solvent reducible, corrosion inhibitive and fast drying for iron and steel.

941P Series – Tripoxy™ Primer

Tripoxy Primer is a 2-part, polyamide cure epoxy primer for iron and steel. This primer features corrosion inhibition and prevention with excellent hardness, durability, and adhesion. Tripoxy Primer provides a smooth, orange peel free finish.

903P Series – Bakote™ Primer

Bakote Primer is a single component, solvent reducible, corrosion inhibitive maintenance primer for industrial iron and steel. It has a high solid content and is a surface tolerant, all-purpose primer designed for simple field application to hand cleaned metal.

AM356 – Fastech ShopCoat™

Fastech ShopCoat primer is a spray only, fast dry – solvent reducible alkyd shop primer. This fast recoat primer is designed for simple OEM application to contaminate free iron and steel surfaces.

Alkyd Enamels

33 Series – TriGuard™

This high gloss, silicone alkyd enamel provides the best gloss retention and durability possible in a single component formula. TriGuard provides excellent protection against moisture and excellent resistance to elevated temperatures up to 350°F. Fast drying, TriGuard cures to an exceptionally hard, uniform finish that rivals factory baked systems for appearance and performance.

35G798 – Bakote™ SuperChrome

An industrial and marine enamel, the 35 Series is a traditional general purpose, high solids, long and medium oil alkyd enamel for industrial and marine maintenance. Bakote SuperChrome has a high gloss, is relatively flexible, and provides excellent corrosion protection.

37 Series – PermaKote™ S

VOC Compliant*, Fast Dry, Acrylic Alkyd Topcoat. Can be applied direct to correctly prepared surfaces. Very good gloss and color retention. Good abrasion resistance and film hardness. Can be catalyzed to provide near urethane performance. High solid content provides high square foot coverage.

41 Series – Tripoxy™

Tripoxy is a 2-part, high solids, high gloss epoxy enamel. This coating cures to an extremely dense and hard finish, without being brittle. Impermeable and insensitive to water, Tripoxy is suitable for submersion service. With excellent adhesion, this coating provides excellent resistance to common solvents, alkalis, and splash and spills from most acids.

43 Series – Tripoxy™ HB

This high solids surface tolerant epoxy mastic provides excellent chemical and water resistance. Intended for application to hand cleaned iron and steel, Tripoxy HB is recommended for submersion in fresh, salt, and waste water, when applied over blasted clean metal.

*Check your local air quality control regulations for VOC compliance.