Industrial Coating Products

All Industrial Products

10 Series – AquaGuard™

Waterborne Silicone Alkyd. The 10 Series is a water reducible gloss silicone alkyd enamel designed primarily for the maintenance of industrial iron and steel structures in VOC regulated areas. It has exceptional gloss retention and an established record of 10+ year durability in fully exposed marine environments.

11 Series – Resin Blend Paint Additive

Paint colorant for tinting and adding corrosion resistance properties to specialty water based industrial coatings. Available resin blends include AE110 Gray Resin Blend (RAL 7031), AE115 Blue Resin Blend (RAL 5015), AE131 Blue Resin Blend (RAL 5010), and AE140 Jet Black Resin Blend. May be packaged in five gallon pails or fifty-five gallon drums. This product can be custom formulated to meet customers specific color requirement.

16 Series – TriAqua™

TriAqua is a VOC compliant*, single component, water reducible, alkyd finishing enamel. Designed for direct, two coat application to hand cleaned iron or steel, TriAqua produces a near automotive gloss, a fast dry, and the best early water resistance of any latex or alkyd. With superior adhesion and durability, TriAqua provides good gloss retention and long lasting metal protection.

16G798 – TriAqua™ SuperChrome

TriAqua™ SuperChrome is a high gloss water reducible enamel. The 16 Series is a single component, water reducible, air-dry finishing enamel with a low VOC content. It is designed for one coat spray application directly onto hand-cleaned iron and steel.

20 Series – TriBake™ W

Water Based, VOC Compliant*, High Performance, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface. Very good corrosion resistance when applied to correctly prepared surfaces. High solid content provides high square foot coverage. Water clean-up.

21 Series – TriBake™ S

VOC Compliant*, High Performance, Solvent Based, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface. Very good corrosion resistance when applied to correctly prepared surfaces. High solid content provides high square foot coverage.

249 Series – Trilon™ S *NEW & IMPROVED FORMULA!*

VOC Compliant*, Fast Dry, Extreme Performance, Exterior Grade Urethane Topcoat. Can be applied direct to correctly prepared surfaces. Outstanding long-term gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness.

250 Series – Trilon™ W

Water Based, VOC Compliant*, Extreme Performance, Exterior Grade Urethane Topcoat. Can be applied direct to correctly prepared surfaces. Outstanding long-term gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Water clean-up.

283P Series – Aquapoxy™ Primer – DISCONTINUED

This product has been discontinued and replaced by our 966P Series TriBond™ W. Please see 966P Series – TriBond™ W for more information.

283PAJ60 – Aquapoxy™ Primer *IMPROVED FORMULA!*

Aquapoxy Primer™ is a high performance primer for fiberglass, aluminum and nonferrous metals where conventional primers may cause adhesion failures. This 2-part, water reducible, VOC compliant epoxy provides excellent adhesion to previously painted surfaces and features good flow and leveling characteristics.

30 Series – TriKote™ W

Water Based, VOC Compliant*, Fast Dry, Economical Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer. Water clean-up.

31 Series – TriKote™ S

VOC Compliant*, Fast Dry, Economical, Solvent Based Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer.

317 Series – DrumKote™

DrumKote is a waterborne, VOC Compliant*, steel drum finish that provides a durable, solvent resistant flexible film with a glossy finish when properly cured. Designed for coating steel drums, DuraKote delivers long lasting durability in a one coat application.

33 Series – TriGuard™

This high gloss, silicone alkyd enamel provides the best gloss retention and durability possible in a single component formula. TriGuard provides excellent protection against moisture and excellent resistance to elevated temperatures up to 350°F. Fast drying, TriGuard cures to an exceptionally hard, uniform finish that rivals factory baked systems for appearance and performance.

33G798 – TriGuard™ SuperChrome

TriGuard is a premium, silicone alkyd enamel with aluminum pigmentation, to provide excellent gloss retention, durability, and
protection against moisture. This product provides an exceptionally hard, uniform finish that rivals factory baked systems for appearance and performance.

35 Series – Bakote™ Industrial & Marine Enamel

A general purpose, high solids, oil modified maintenance enamel, Bakote provides excellent corrosion protection and is easy to apply.

35G798 – Bakote™ SuperChrome

An industrial and marine enamel, the 35 Series is a traditional general purpose, high solids, long and medium oil alkyd enamel for industrial and marine maintenance. Bakote SuperChrome has a high gloss, is relatively flexible, and provides excellent corrosion protection.

360 Series – Trilon™ Clear – DISCONTINUED

This product has been discontinued and replaced by our new 249 Series – Trilon™ S. Please see 249 Series – Trilon™ S for more information.

361 Series – Trilon™ – DISCONTINUED

This product has been discontinued and replaced by our new 249 Series – Trilon™ S. Please see 249 Series – Trilon™ S for more information.

37 Series – PermaKote™ S

VOC Compliant*, Fast Dry, Acrylic Alkyd Topcoat. Can be applied direct to correctly prepared surfaces. Very good gloss and color retention. Good abrasion resistance and film hardness. Can be catalyzed to provide near urethane performance. High solid content provides high square foot coverage.

37G798 – PermaKote™ SuperChrome

A fast drying product finishing enamel, the 37 Series is a single component, solvent based, alkyd topcoat with a high solids content, providing superior gloss, depth, and clarity.

41 Series – Tripoxy™

Tripoxy is a 2-part, high solids, high gloss epoxy enamel. This coating cures to an extremely dense and hard finish, without being brittle. Impermeable and insensitive to water, Tripoxy is suitable for submersion service. With excellent adhesion, this coating provides excellent resistance to common solvents, alkalis, and splash and spills from most acids.

43 Series – Tripoxy™ HB

This high solids surface tolerant epoxy mastic provides excellent chemical and water resistance. Intended for application to hand cleaned iron and steel, Tripoxy HB is recommended for submersion in fresh, salt, and waste water, when applied over blasted clean metal.

44 Series – Epoxy Acrylic DTM *NEW!*

This two-component water-based epoxy acrylic primer and finish is designed for direct-to-metal applications over properly prepared surfaces. It dries to a tough, durable finish and exhibits excellent performance, high build, and rust-inhibitive properties. This coating is used to protect exterior and interior structural ferrous and nonferrous steel, institutional walls, and industrial machinery. When used in conjunction with high build zinc rich primers, it is suitable for moderate duty marine applications. When used as one part of a three-coat system, 44 Series is also suitable for bridge coating applications.

50 Series – TriAqua™

This water based, VOC compliant*, fast dry, acrylic alkyd topcoat can be applied direct to correctly prepared surfaces. With very good gloss and color retention, TriAqua provides good abrasion resistance, film hardness, and water clean-up.

500 Series – TriThane™ Acrylic Urethane – DISCONTINUED

This product has been discontinued and replaced by our new 249 Series – Trilon™ S. Please see 249 Series – Trilon™ S for more information.

500HR6 – Goldstone™ Polyurethane

Goldstone™ is a specially formulated coating designed to have high infrared radiation reflectance. Formulated for the NASA Deep Space Instrumentation Facilities to protect microwave antennas from heat accumulation, this enamel is also used to protect large dish telescopes and radio antennas.

505 Series – Liquid Porcelain™ Acrylic Urethane Finishing Enamel – DISCONTINUED

This product has been discontinued and replaced by our new LP249 Series – Liquid Porcelain™. Please see LP249 Series – Liquid Porcelain™ for more information.

6 Series – Goldstone™

Original formula, High IR Reflectance Microwave Antenna Enamel

Please Call for Availability

7 Series – Goldstone™ *NEW!*

A high IR reflectance antenna enamel, this new & improved water based formula protects microwave antennas, large dish telescopes, and radio receivers from infrared radiation and heat accumulation. This ultra low VOC coating also allows electromagnetic waves to pass, ensuring accurate data collection.

902P Series – TriPrime™

Triangle Industrial’s TriPrime is a high performance “work horse” primer with a high solid content. The 902P Series is solvent reducible, corrosion inhibitive and fast drying for iron and steel.

903P Series – Bakote™ Primer

Bakote Primer is a single component, solvent reducible, corrosion inhibitive maintenance primer for industrial iron and steel. It has a high solid content and is a surface tolerant, all-purpose primer designed for simple field application to hand cleaned metal.

920Z Series – KoldGalv™

The 920Z Series is an epoxy ester primer for iron, steel, and galvanized metal. With a high zinc dust content, KoldGalv™ provides rich galvanizing repair.

941FAM35 – Liquid Porcelain™ Epoxy Primer

Triangle Industrial’s premier high solids epoxy primer, 941FAM35 is formulated to fill rough surfaces while promoting great surface adhesion – perfect for even the toughest tub refinishing job!

941P Series – Tripoxy™ Primer

Tripoxy Primer is a 2-part, polyamide cure epoxy primer for iron and steel. This primer features corrosion inhibition and prevention with excellent hardness, durability, and adhesion. Tripoxy Primer provides a smooth, orange peel free finish.

943P309 – Tripoxy™ HB Primer

This two-component formula is an excellent surface tolerant, high build epoxy primer designed for ferrous and nonferrous metals where conventional primers may cause adhesion failures. Exhibiting good flow and leveling characteristics, this primer provides an extremely high performance coating system when used in conjunction with a two-part urethane topcoat.

945P Series – AquaTech™ Primer

This waterborne epoxy ester primer is a single component, water reducible, corrosion inhibitive primer. Formulated for shop application to steel, galvanized steel, and aluminum parts, AquaTech Primer provides excellent protection from elements, and good impact and abrasion resistance.

954P Series – ShopCoat™ S

VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and waterbased alkyd topcoats.

955P Series – TriPrime™ S

VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.

956P Series – TriBond™ S

VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated for extreme corrosion protection. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats.

964P Series – ShopCoat™ W

Water Based, VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and water based alkyd topcoats.

965P Series – TriPrime™ W

Water Based, VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.

966P Series – TriBond™ W

Water Based, VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated to provide a quick recoat time to meet high speed production needs. TriBond W bonds extremely well to properly prepared iron phosphate and blasted surfaces to provide durable protection against corrosion and water. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats.

980P Series – AK8™ Rust Converting Latex Primer

AK8 is a unique, 2-step electrochemical process that converts rust into a black coating to further be primed with a rust preventive primer or topcoated. By converting rust, this corrosion control coating prevents rust from returning where old rust had formed.

983P946 – Liquid Porcelain™ Tri-Bond Adhesion Promoter

Triangle Industrial’s Tri-Bond is the latest generation in chemical bonding technology! An integral part of the Liquid Porcelain system Tri-Bond is easily applied and fast drying. Our trademark hot-pink color lets you see immediately that you have full and even coverage and we guarantee our brand will not bleed thru, ruining your work like some of the other inferior products out there. Wipe on to even the slickest porcelain, fiberglass, steel, ceramic or masonry surface for dramatically improved surface adhesion.

AM356 – Fastech ShopCoat™

Fastech ShopCoat primer is a spray only, fast dry – solvent reducible alkyd shop primer. This fast recoat primer is designed for simple OEM application to contaminate free iron and steel surfaces.

AT60 – Liquid Porcelain™ Urethane Thinner

Triangle Industrial’s AT60 is a water and alcohol-free thinner specifically designed for optimum thinning, flow and dry time of our Liquid Porcelain refinishing system.

AX01 – Liquid Porcelain™ Nitro-Speed Cure Accelerator

Triangle Industrial’s AX01is a powerful accelerator used to decrease the curing time of Liquid Porcelain refinishing system.

AX03 – Liquid Porcelain™ Anti-Slip Additive

Triangle Industrial’s AX03 is a high-quality anti-slip additive for the Liquid Porcelain refinishing system. It contains not only one but two sizes of polypropylene beads uniquely designed to create an enhanced slip-resistant surface.

AX04 – Liquid Porcelain™ Bubble Gum Scent Additive

Triangle Industrial’s AX04 is a high-performing additive for the Liquid Porcelain refinishing system that masks even the strongest solvent odors inherent in any tub refinishing system with a pleasant smell, making it easier to work with and definitely more pleasing to any customer.

CAL24 – Latex Primer

Water Based Structural Primer

CAL25 – PWB 146E Pink Primer

This Caltrans specification formula is a high performance, corrosion inhibiting water based primer formulated for use on iron, zinc, steel, and galvanized metal. CAL24 exhibits excellent adhesion and corrosion resistance on properly prepared surfaces.

CAL37 – PWB 161A Non-Leafing Aluminum

This Caltrans specification formula is a high performance, corrosion inhibiting water based primer formulated for use on iron, zinc, steel, and galvanized metal. CAL24 exhibits excellent adhesion and corrosion resistance on properly prepared surfaces.

CAL38 – PWB 162A Leafing Aluminum

This Caltrans specification formula is a high performance, corrosion inhibiting water based primer formulated for use on iron, zinc, steel, and galvanized metal. CAL24 exhibits excellent adhesion and corrosion resistance on properly prepared surfaces.

CAL51 – PWB 171B Light Green Topcoat

This Caltrans specification formula is a high performance, corrosion inhibiting water based primer formulated for use on iron, zinc, steel, and galvanized metal. CAL24 exhibits excellent adhesion and corrosion resistance on properly prepared surfaces.

CAL52 – PWB 172B Dark Green Topcoat

This Caltrans specification formula is a high performance, corrosion inhibiting water based primer formulated for use on iron, zinc, steel, and galvanized metal. CAL24 exhibits excellent adhesion and corrosion resistance on properly prepared surfaces.

LP249 Series – Liquid Porcelain™ Acrylic Urethane Finishing Enamel *NEW & IMPROVED FORMULA!*

Triangle Industrial’s Liquid Porcelain product family has proven itself time after time as a unique and invaluable tool for tub and tile re-finishers for over 35 years. With a new and imrpoved formula, Liquid Porcelain has increased performance and a lower VOC. This porcelain–like glaze was formulated specifically by Triangle Industrial for the tub and tile industry and can be used on bathtubs made of fiberglass, porcelain or steel, sinks, Formica, faux marble or ceramic tile countertops in the kitchen or bath, as well as shower stalls made of fiberglass or ceramic tile.

*Check your local air quality control regulations for VOC compliance.