Waterborne Primers & Enamels

Waterborne Primers

945P Series – AquaTech™ Primer

This waterborne epoxy ester primer is a single component, water reducible, corrosion inhibitive primer. Formulated for shop application to steel, galvanized steel, and aluminum parts, AquaTech Primer provides excellent protection from elements, and good impact and abrasion resistance.

980P Series – AK8™ Rust Converting Latex Primer

AK8 is a unique, 2-step electrochemical process that converts rust into a black coating to further be primed with a rust preventive primer or topcoated. By converting rust, this corrosion control coating prevents rust from returning where old rust had formed.

CAL24 – CalTrans Specification Red Oxide Latex Primer

This high performance, low VOC*, water reducible latex primer was formulated for iron, steel, and galvanized metal. CAL24 provides excellent adhesion and corrosion resistance on properly prepared surfaces where a waterbased topcoat is to be applied. Intended for field application, CAL24 can also be used as a shop or maintenance primer.

966P Series – TriBond™ W

Water Based, VOC Compliant*, Fast Recoat, 2-part Epoxy Primer, formulated to provide a quick recoat time to meet high speed production needs. TriBond W bonds extremely well to properly prepared iron phosphate and blasted surfaces to provide durable protection against corrosion and water. Compatible with solvent and water based alkyd, urethane, and epoxy topcoats.

283P Series – Aquapoxy™ Primer – DISCONTINUED

This product has been discontinued and replaced by our 966P Series TriBond™ W. Please see 966P Series – TriBond™ W for more information.

964P Series – ShopCoat™ W

Water Based, VOC Compliant*, Fast Recoat, Economical Alkyd Primer. Compatible with solvent and water based alkyd topcoats.

965P Series – TriPrime™ W

Water Based, VOC Compliant*, Fast Recoat, Alkyd Primer, formulated for long term corrosion protection. Compatible with solvent and water based alkyd topcoats.

Waterborne Enamels

20 Series – TriBake™ W

Water Based, VOC Compliant*, High Performance, Bake Finish Topcoat. Very good gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Chip and mar-resistant surface. Very good corrosion resistance when applied to correctly prepared surfaces. High solid content provides high square foot coverage. Water clean-up.

10 Series – AquaGuard™

Waterborne Silicone Alkyd. The 10 Series is a water reducible gloss silicone alkyd enamel designed primarily for the maintenance of industrial iron and steel structures in VOC regulated areas. It has exceptional gloss retention and an established record of 10+ year durability in fully exposed marine environments.

16 Series – TriAqua™

TriAqua is a VOC compliant*, single component, water reducible, alkyd finishing enamel. Designed for direct, two coat application to hand cleaned iron or steel, TriAqua produces a near automotive gloss, a fast dry, and the best early water resistance of any latex or alkyd. With superior adhesion and durability, TriAqua provides good gloss retention and long lasting metal protection.

250 Series – Trilon™ W

Water Based, VOC Compliant*, Extreme Performance, Exterior Grade Urethane Topcoat. Can be applied direct to correctly prepared surfaces. Outstanding long-term gloss and color retention. High chemical and abrasion resistance. High impact resistance and film hardness. Water clean-up.

30 Series – TriKote™ W

Water Based, VOC Compliant*, Fast Dry, Economical Topcoat. Can be applied direct to correctly prepared surfaces. Tough, high gloss finish. Good gloss and color retention. Good exterior performance when used over a primer. Water clean-up.

317 Series – DrumKote™

DrumKote is a waterborne, VOC Compliant*, steel drum finish that provides a durable, solvent resistant flexible film with a glossy finish when properly cured. Designed for coating steel drums, DuraKote delivers long lasting durability in a one coat application.

*Check your local air quality control regulations for VOC compliance.